Things to Consider Before Buying an HVAC System

A Heating, Ventilation, Air Conditioning system is one of those household devices that has a major role to play in bettering the quality of life. It has both the function of heating up or cooling a room and give an amiable temperature to the surrounding, making life comfortable for everyone. The main function of an HVAC system is to provide a channel for outdoor fresh air and also dilute the inside air which may be contaminated by a number of pollutants. Thus, it is primarily a heating and cooling system. Setting up an HVAC system at home needs a lot of consideration. Few points to be considered before investing in an HVAC system are as follows.

Get A Ductwork Check Done

Even if you buy the best heating and cooling system and your house does not have proper ductwork, the efficiency of the HVAC system is going to reduce by almost 30%. A thorough examination by a contractor is probably a good idea. They will examine for any leaks or breakages in the ducts and also remove any oil or grease that may have accumulated over time. Basically, they are going to revive your ductal system as required.

Installing an Appropriate Furnace

The kind of furnace that is installed in the heating and cooling system plays a significant role in making the system more energy efficient, by saving close to 20% energy. Old furnaces that are used have an Annual Fuel Utilization Efficiency rating of 56%. On the other hand, newer furnaces have an efficiency of 98.5%. There are three basic choices from which you can pick the one most appropriate for you. The first one is the single variable type where the fan rotates at a constant speed throughout, irrespective of what the requirement may be and the speed is only high. The two-stage type of a heating and cooling system has two settings, high and low. You could choose either of the extremes. This is again not a very useful and energy efficient type of furnace but still scores better than the previous. The one that fits the bill perfectly is the variable stage handlers that can be adjusted according to the environmental conditions. Naturally, this is the most energy-efficient choice among all the heating and cooling systems available in the market right now.

Choose an Appropriate Air Conditioner

The function of an air conditioner is primarily to regulate the temperature of your room and the air quality as well. The choice of an air conditioner is again based on the energy efficiency that it has. It is based on the Seasonal Energy Efficiency Ratio, also known as SEER. The air conditioner with a higher SEER value will be more efficient and help to keep your electricity bill down. Similarly, a variable speed compressor tends to make lesser noise than the older models which sports a reciprocating type of coil. Make sure the coils of the air conditioner is made up of aluminum and not copper and steel so that the heat produced is not much.

Consider A Heat Pump

If you are looking for a single device that will function as a heating and cooling system, a heat pump is probably your best choice. It mainly acts as an air conditioner that removes whatever heat is present inside. However, if it is too cold inside, simply reverse the valve and the heat from the outside will be transported in. Thus, not only does this regulate the temperature like the way you want it but also saves a lot of energy.

Once you have read through this article, making that educated choice for an HVAC system should now become an easier one. Diligently follow these tips so that it becomes easier for you to make the choice.