Install Cantilevered Stairs and making your home extraordinarily

A cantilevered type of staircase is surely an incredibly attractive addition to any residential or commercial space. These staircases are often referred to as floating stairs. Installing a cantilevered stair system is a difficult task and it needs to be performed by experts. 

Terminology Associated With Stairs 
In order to ensure that the cantilevered stair project progresses in the correct manner, it is vital to be familiar with the various terms associated with stairs. 
Cantilevered Stairs

The tread 
The step of each stair is known as tread. It is a part which supports the foot of a person as he climbs up or descends from the staircase. Each tread of the staircase should be leveled. In a cantilevered stair system, each tread should overlap the previous one. The tread should be wide enough in order to allow the foot to be properly placed on it. It makes the stairs more comfortable to use. 

The Rise 
The height between each step is referred to as the rise. It is important that a staircase maintains the exact same rise for each of its step. If there is a difference in the rise of the stairs, it might create problems while climbing the staircase. The maximum rise permitted for a staircase will be stated by the building regulations of the area. 

It is possible for the rise to be closed or open. A cantilevered stair will have an open type of rise. In this rise, the height should not allow a 100mm sphere to pass through it. This is intended as a safety measure as the head of a child will not fit through the opening in that case. It is possible to decrease the rise in different ways. The front of each tread can have a downward extension or the back of each thread can have an upward extension. Doing either or both will reduce the size of the opening. Another option would be to install a glass panel for the rise. 

Balustrade 
The railing or the guarding is better known as the balustrade. It is possible to use a wide variety of materials for the construction of the balustrade. If a cantilevered stair is being opted for, then glass or metal is surely preferred. Some of these staircases are also constructed by using a mix of these materials. The balustrade should ideally be equal to the length of the stairs themselves. The balustrade should follow the same safety regulations as that of the rise. It should not have any openings that can allow a child to pass through. 

Handrail 
The handrail allows the users to lean on them for support. It can be fixed to the balustrade or be a floating one. Handrails can even be installed without the need for a balustrade. 

The Going 
The depth or width of each step is called the going. The going should be deep enough to allow a comfortable foothold on the stairs. A higher going will increase the comfort of use of the floating staircase. 

The Stringer 
This is the support for the treads and the risers of a staircase. It is possible to get a number of options for the stringers in the traditional kind of commercial staircases. However, for cantilevered ones, it is better to opt for concealed stringers so that the floating effect is not ruined. 

Pitch 
The slope of any staircase is referred to as the pitch. A gradual slope will make the stairs more comfortable to use. A steeper slope will make it more difficult to climb or descend the stairs. The local building regulations should be maintained when the pitch of the stairs is being determined. 

Do you like to know more about installation of cantilevered stairs? Visit the link, you will definitely get some more beneficial information.
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment